3 Advanced use
208396 rev 2 SOREDEX 15
The Start delay options allow the start delay time to be
selected.
• Short = approximately 0.2 seconds
• Medium = approximately 0.4 seconds
(recommended default)
• Long = approximately 0.6 seconds
Select Manual if you want processing to start only when
the START key is pressed.
Note! Processing starts even if the plate is:
• Wrong way round
• Not detected
• Not inserted at all
Note! Unit turns off in manual mode if user is pressing ON/
OFF key regardless of imaging plate sensing in the plate
carrier.
3.3.2 Touchless operation
Note! This system does not support touchless operation.
To Next Page
Loading...
