DPU/DO - Page 26 - REV. 5/25/00
--------------------------------
**Set Parameters For Unit - 1 **
---> LEFT LIMITS
*(0) Share
(1) Don't Share
Use < > to Select Option
Use <NUMBER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- Left Limits Parameter Screen --
This parameter deals with how left limit switches are handled on an individual carriage. If the
carriage does not have its own left limit switch, but instead is using the limit switch information
from the right side of the carriage to its left, this parameter should be set to SHARE. However, if
this carriage has its own left limit switch (and the carriage to its left has a right limit switch), this
parameter should be set to DON'T SHARE. This option might be used when the loaded weight
of an adjacent carriage is significantly different or when split carriages are used to accommodate
columns or obstructions.
--------------------------------
**Set Parameters For Unit - 1 **
---> RIGHT LIMITS
*(0) Share
(1) Don't Share
Use < > to Select Option
Use <NUMBER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- Right Limits Parameter Screen --
This parameter deals with how right limit switches are handled on an individual carriage. If the
carriage does not have its own right limit switch, but instead is using the limit switch on the left
side of the carriage to its right, this parameter should be set to SHARE. However, if this carriage
has its own right limit switch (and the carriage to its right has a left limit switch), this parameter
should be set to DON'T SHARE. This option might be used when the loaded weight of an
adjacent carriage is significantly different or when split carriages are used to accommodate
columns or obstructions.
To Next Page
Loading...
Need help?
General
