DPU/DO - Page 42 - REV. 5/25/00
--------------------------------
**Set Parameters For Unit - 1 **
--> OPT REG 4 -IR OPTION (EC400)
Enter Value <0-255> - 3_
Use < > to Select Option
Value <ENTER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- EC400 Infrared Option Key Parameter Screen --
This screen pertains to and will only be displayed on systems configured with EC400 controllers.
The controls provide the user with an optional infrared input, found on the managerial key. The
standard supported functions are listed below. Other custom options may be added for specific
customer needs. No hardware jumper is required to implement this option, however the evenly
spacing parameters have to set properly to take advantage of this feature. It is also a useful tool
for the installer to initially set and test the spacing parameters.
0 - IR Option Key Disabled - nothing happens when the IR option key is pressed.
1 - Module alternate direction packing, evenly spaces carriages, controls remain functional.
2 - Module closes left, evenly spaces carriages, control heads remain functional.
3 - Module closes right, evenly spaces carriages, control heads remain functional.
To Next Page
Loading...
Need help?
General
