DPU/DO - Page 28 - REV. 5/25/00
--------------------------------
**Set Parameters For Unit - 1 **
---> SAFETY FAULT WARNING
*(0) Off
(1) On
Use < > to Select Option
Use <NUMBER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- Safety Fault Warning Parameter Screen --
The safety fault warning is an audible beeping sound which is heard any time the movement
cycle has been interrupted by a safety activation, such as a safety sweep, aisle entry sensor or
ZFS. The beeper itself is optional and is not found on all systems.
--------------------------------
**Set Parameters For Unit - 1 **
---> POWER LINE FREQUENCY
*(0) 60 Hz
(1) 50 Hz
Use < > to Select Option
Use <NUMBER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- Power Line Frequency Parameter Screen --
Operation of DC motor controls varies a great deal when the power line frequency changes. This
parameter screen allows the user to select the standard 60 Hz power line frequency, or the
European 50 Hz frequency for proper operation in some overseas installations.
To Next Page
Loading...
Need help?
General
