DPU/DO - Page 35 - REV. 5/25/00
--------------------------------
**Set Parameters For Unit - 1 **
--> ZFS LEFT WEB LIGHTS
Enter Value <0-255> - 12_
Use < > to Select Option
Value <ENTER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- ZFS Left Aisle LEDs Parameter Screen --
This screen is only shown if ZFS has been selected. If the carriage is a master configured with
left aisle ZFS then enter the number of LEDs. This value can be set from 0 to 255 LEDs. Zero
allows for potential Quadrature only systems. See page 23 for details regarding entry of a
numeric value.
--------------------------------
**Set Parameters For Unit - 1 **
--> ZFS RIGHT WEB LIGHTS
Enter Value <0-255> - 12_
Use < > to Select Option
Value <ENTER> to Set Option
<SAVE> to Save <ESCAPE> to Exit
--------------------------------
-- ZFS Right Aisle LEDs Parameter Screen --
This screen is only shown if ZFS has been selected. Enter the right aisle number of LEDs. This
value can be set from 0 to 255 LEDs. See page 23 for details regarding entry of a numeric value.
To Next Page
Loading...