55
5. Power Reset
Q: What is Power Reset?
A: Power Reset is simply a restart for the Coordinator. Power Reset acts like the startup process. The
LEDs will switch from one to another and then back and forth a few times. All MODE Free Keypads will also reset af-
ter a Coordinator Power Reset.
6. Activity Led Indicator
Q: Why does the Activity LED fl ash even when the keypad is not in use?
A: The Coordinator is broadcasting the latest MZC System information wirelessly to all MODE Free Keypads, so mes-
sage broadcasting is ongoing whether or not there is any activity on the keypad.
MODE FREE WALL DOCK
1. Address Switch
Q: Why does the Wall Dock have an Address Switch?
A: MODE Free does not have an Address Switch, so the Address Switch on the Wall Dock helps the keypad identi-
fy the local zone when keypad is docked.
2. Charging LED Indicator
Q: What does Charging LED Indicator ON/OFF mean?
A: The Charging LED is ON when the MODE Free battery is charging and is OFF when the battery is fully charged.
3. Charging Time
Q: How long is the charging time?
A: Wall Dock is a regular charger and takes 6 to 8 hours to fully charge the battery.
MODE FREE TABLE DOCK
1. Power Supply
Q: What power supply should be used with the Table Dock?
A: Please use SpeakerCraft PS-2.0 Power Supply and make sure the rating is 12VDC, minimum 800mA.
2. Charging LED Indicator
Q: What does Charging LED Indicator ON/OFF mean?
A: The Charging LED is ON when the MODE Free battery is charging and is OFF when the battery is fully charged.
3. Charging Time
Q: How long is the charging time?
A: Table Dock is a fast charger and it takes around 2 hours to fully charge the battery.
4. Faceplate
Q: Is the faceplate changeable?
A: Yes, it is changeable.
Q: How is the faceplate changed?
A: Slide out the faceplate downward, then slide in the other one followed the guiding path.
5. Keypad Usage
Q: Can MODE Free be operated when it is docked to the Table Dock?
A: Yes, MODE Free can be used while it is charging.
FAQ
To Next Page
Loading...
Need help?
General
