SpeakerCraft MODE 3.1 User Manual

54
18. Reset
Q: How is a MODE 3.1/MODE Free reset?
A: Press and hold the Volume Knob for 5 seconds.
Q: Does Keypad Reset work for both MODE 3.1/MODE Free Keypads?
A: Yes, they work the same.
Q: What situation will require a Keypad Reset?
A: A Keypad Reset may be required after system updates or upgrade, the system or Coordinator
is reset, or when MODE Free is changed from docked to undocked confi guration.
19. Secret Access For Network Settings
Q: What is Secret Access?
A: Secret Access is a special access that bypasses normal operation, it also provides a backdoor for a user when a
keypad is not operating correctly.
Q: How is it accessed?
A: Press the Power OFF, ARROW UP and ARROW DOWN Buttons in sequence with the SpeakerCraft Logo on the
keypad display. Press these three buttons in rapid sequence to access the Network Settings Menu.
20. Keypad Freeze
Q: Why does the MODE Free freeze after it is docked?
A: If the keypad freezes during System Setup, a possible reason is data connection error. Please try to release and re-
dock the MODE FREE. If that fails, check the CAT5 cable and 12-Pin Interconnect.
Q: Why does the MODE Free freeze when it is undocked?
A: A possible cause is data connection error, with the wireless network. Confi rm that the Coordinator is functioning
properly fi rst. If so, try a Keypad Reset. If still frozen, reset the MZC System.
MODE FREE COORDINATOR
1. Address Switch
Q: When is this Address Switch used?
A: The Address Switch is not in use at this time and is reserved for future additional features.
2. Power Supply
Q: Does the Coordinator require a power supply?
A: No. The Coordinator will power up through CAT5 cable. CAT5 cable runs over 500’ require a dedicated power sup-
ply.
Q: If needed, what power supply should be used?
A: Please use SpeakerCraft PS-1.0 Power Supply.
3. Expansion Ports
Q: Which Expansion Port should be used for connections?
A: The ports are parallel so either will work for all appropriate connections.
4. Network Reset (Coordinator Function)
Q: What is Network Reset?
A: Network Reset is a reset function for the entire wireless network. IT WILL ERASE ALL EXISTING NETWORK
INFORMATION. Once this function is performed, a whole wireless network setup is required.
Q: How is Network Reset executed?
A: Press and hold the Network Reset Button for 2 seconds. The Reset Network LED will fl ash until the reset process is fi n-
ished.
FAQ

SpeakerCraft MODE 3.1 Specifications

General

Brand	SpeakerCraft
Model	MODE 3.1
Category	Keypad
Language	English