SPECS Nanonis SC5 - Operating and Storage Conditions; Operating Conditions; Storage and Transportation Conditions

SC5 Signal Conversion Specifications
•
43
Operating conditions
Environment The SC5 is designed for indoors dry laboratory use only
Ambient temperature 15 ˚C to 35 ˚C
in accordance with IEC-60068-2-1 and IEC-60068-2-2
Humidity 10-50% relative humidity, non-condensing
in accordance with IEC-60068-2-56
Maximum altitude 2000 m
Pollution degree 2 (indoor use only)
Installation category II
Mains supply voltage fluctuations Are not to exceed ±10% of nominal supply voltage
Storage and transportation conditions
Ambient temperature -20 ˚C to 70 ˚C
in accordance with IEC-60068-2-1 and IEC-60068-2-2
Humidity 5-95% relative humidity, non condensing
in accordance with IEC-60068-2-56
Pollution degree 2 (indoor use only)