SC5 Signal Conversion Safety information
7
Safety information
• Carefully read this manual and all related documents before installing and using the instrument.
• The safety notes and warnings have to be obeyed at all times.
• The SC5 may only be installed and used by authorized and instructed personnel who have read this manual.
• The SC5 is designed for indoors dry laboratory use only.
• The SC5 may only be used as specified in this manual, otherwise it may not fulfill safety requirements.
• Do not install substitute parts or perform modifications to this instrument. No user serviceable parts inside.
• Do not operate the SC5 if it is damaged or not functioning properly. Never use damaged accessories.
• Do not operate the instrument during electrical storms, in order to avoid damaging the instrument.
• Never use corrosive or abrasive cleaning agents or polishes. If necessary, clean the instrument with a soft and
dry cloth, and make sure that it is completely dry and free from contaminants before returning it to service.
Warning: Lethal voltages are present inside the instrument. Disconnect the mains plug from the
electrical outlet before opening the instrument
To Next Page
Loading...