Need help?Do you have a question about the SPECS Nanonis SC5 and is the answer not in the manual?
General| Input Range | ±10 V |
|---|---|
| Input Impedance | 1 MΩ |
| Interface | USB |
| Resolution | 16-bit |
| Sampling Rate | 2 MS/s |
Describes warning signals and symbols used in the manual.
Outlines essential safety guidelines for instrument operation and handling.
Details the changes and updates made across different versions of the manual.
Illustrates the internal functional blocks and connections of the SC5.
Details the connectors and indicators on the SC5 front interface.
Describes the connectors and controls located on the back of the SC5.
Lists the items included in the SC5 package upon purchase.
Guides users through initial setup and connection to the Nanonis RC5 controller.
Explains how to connect multiple SC5 units to a single Nanonis RC5.
Explains different options for electrical grounding of the SC5.
Details the procedure for powering up the SC5 and subsequent actions.
Describes how to connect signal sources to the SC5 analog inputs.
Discusses using shielded twisted-pair cables for analog input connections.
Explains how to configure analog inputs for differential measurements.
Shows the circuit diagram and outlines the calibration process for analog inputs.
Details how to connect the SC5 analog outputs to external equipment.
Discusses using shielded twisted-pair cables for analog output connections.
Explains how to configure analog outputs for differential measurements.
Shows circuit diagrams and explains bipolar/unipolar operation for analog outputs.
Introduces hrDAC™ technology and the calibration procedure for analog outputs.
Details connecting the SC5 fast analog output to external systems.
Provides the circuit diagram for the fast analog output stage.
Describes how to connect external devices to the auxiliary power supply.
Explains using a Y-splitter and details the connector pin assignments.
Addresses problems where the SC5 fails to power on.
Solves issues with the auxiliary power supply not functioning correctly.
Lists the overall physical and electrical characteristics of the SC5.
Details the technical specifications for the SC5 analog input channels.
Lists the technical specifications for the SC5 analog output channels.
Provides technical specifications for the SC5 fast analog output.
Details the technical specifications of the SC5 auxiliary power supply.
Specifies the recommended environmental conditions for SC5 operation.
Outlines conditions for storing and transporting the SC5.
Presents measurements of noise characteristics for analog inputs.
Details DC-related performance measurements like DNL, INL, offset, gain, accuracy.
Covers AC-related performance like frequency response, linearity, harmonic distortion, crosstalk.
Analyzes spectral noise and low/high frequency noise of analog outputs.
Details DC performance like DNL, INL, offset, gain error, accuracy, resolution.
Covers frequency response, transfer function, linearity, distortion, crosstalk for analog outputs.
Measures output voltage stability over a 12-hour period.
Analyzes how temperature affects the output voltage.
Presents spectral noise measurements for the fast analog output.
Details low-frequency (0.1-10 Hz) and high-frequency (10-300 kHz) noise.
Covers offset, gain error, and frequency response for the fast analog output.
Outlines warranty, copyright notice, and registered trademarks.
To Next Page