Theory of Operation
Customer Interface / Cycle Selection System
The Customer Interface / Cycle Selection System consists of the Control Panel/LED Assembly along with
the program timer, option buttons, and Wash Temperature and Dry Time Selectors.
Control Panel/LED Assembly
The Control Panel/LED Assembly (Fig. 3-3) is removed as a single assembly and is connected to the
Module Board by 14 connection points to the wiring harness.
The assembly contains all the buttons, LED’s and switches for the user to operate the washer-dryer.
This interfaces what the consumer commands to the Module Board.
NOTE: Knobs, Selectors and LED’s are not shipped with the replacement Control/Panel LED Assembly.
To Next Page
Loading...
