PXS-710D Section 1
12
1.5.1 CONTINUED:
[LIST OF CABLES AND LENGTHS]
DESCRIPTION P/N LENGTH
AC Power Cable 560021 12ft
Exposure Switch 910007 12ft
“WARNING: Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment could result
in increased electromagnetic emissions or decreased electromagnetic
immunity of this equipment and result in improper operation.”
“WARNING: Portable RF communications equipment (including
peripherals such as antenna cables and external antennas) should be
used no closer than 30 cm (12 inches) to any part of the PXS-710D,
including cables specified by the manufacturer. Otherwise, degradation
of the performance of this equipment could result.”
NOTE: The EMISSIONS characteristics of this equipment make it suitable
for use in industrial areas and hospitals (CISPR 11 class A). If it is used
in a residential environment (for which CISPR 11 class B is normally
required) this equipment might not offer adequate protection to radio-
frequency communication services. The user might need to take
mitigation measures, such as relocating or re-orienting the equipment.
To Next Page
Loading...