January, 2016 120-65
Model F120 UV/IR Flame Detector
REPAIRS
All equipment requiring repair must be shipped to Safety Systems Technology accompanied
by a Return Material Authorization (RMA) form. The form can be downloaded through SST’s
website at www.safetysys.com.
1. The following information is required:
• Model Number or Part Number
• Serial Number - imprinted on the nameplate of the detector
• Brief description of the problem
• Contact information
• Complete shipping address for the return of the repaired items
2. Contact Safety Systems Technology to obtain an RMA number at:
+1.949.583.1857 Main
+1.866.507.2264 Toll-free number (USA only)
or via e-mail at techalert@safetysys.com
3. Ship the unit(s) prepaid to with a copy of the RMA form inside the package:
Safety Systems Technology
Attention: Repair Department
23282 Mill Creek Drive, Suite 215
Laguna Hills, California 92653
U.S.A.
+1.949.583.1857 Phone
Upon receipt of your equipment, a repair estimate will be sent to you and repairs will be
made only after your authorization. Repair and shipping costs will be invoiced to account
holders or charged to a credit card.
To Next Page
Loading...