St George DEO2B - Roast Probe Operation

CONTROL PANEL OPERATION
3.9 Roast Probe Operation
WARNING: This mode of cooking is suitable only for Normal/Oven, Classic Bake, Fan AssistFan Oven or High Bake
modes. Use of the probe sensor in either Grill or Fan Grill modes will damage the probe.
The roast probe operation shares the same digit display as does the timer functions and operates only in the
main oven. The roast probe must be plugged into its socket within the oven compartment to display the current
temperature of the roast probe sensor in the left-hand pair of digits. The Roast Probe Set Temperature (RPST)
will be displayed in the right hand pair of digits and can be adjusted by pressing the V or A buttons.
NOTE: The RPST can be set between 000 and 9900, however, it is not recommended to set the RPST
above 8500 as
this gives inconsistent results and may result in the burning of food.
Once the temperature of the roast probe's sensor reaches
or exceeds the RPST the oven will automatically turn
off and the alarm will sound. The alarm can be cancelled by pressing any of the 4 left-hand buttons. If not
manually cancelled the alarm will self cancel after a few minutes. To cancel the roast probe function, remove the
roast probe from its socket.
For complete details refer to Roast Probe Cooking.
NOTE: Whenever the roast probe is plugged in, the RPST is re-set to 8000.
The time is not displayed when the roast probe is plugged in. If the roast probe is disconnected the display
reverts back to the time of day.
Automatic programmed cooking can be used with the roast probe.
12