ST STM32F3 Series User Manual

The STM32 Cortex-M4 instruction set PM0214
164/262 PM0214 Rev 10
3.10.14 VMOV register
Copies the contents of one register to another.
Syntax
VMOV{cond}.F64 Dd, Dm
VMOV{cond}.F32 Sd, Sm
Where:
• ‘cond’ is an optional condition code, see Conditional execution on page 65.
• ‘Dd’ is the destination register, for a doubleword operation.
• ‘Dm’ is the source register, for a doubleword operation.
• ‘Sd’ is the destination register, for a singleword operation.
• ‘Sm’ is the source register, for a singleword operation.
Operation
This instruction copies the contents of one floating-point register to another.
Restrictions
There are no restrictions
Condition flags
These instructions do not change the flags.

ST STM32F3 Series Specifications

General

Series	STM32F3
Core	ARM Cortex-M4
Max CPU Frequency	72 MHz
Operating Voltage	2.0 V to 3.6 V
GPIO Pins	Up to 80
Timers	Advanced-control, general-purpose, basic timers
ADC	12-bit
DAC	12-bit
Communication Interfaces	USART, SPI, I2C, CAN, USB
Operating Temperature	-40°C to 85°C
Package	LQFP, UFQFPN, WLCSP