EasyManuals Logo
Home>ST>Microcontrollers>STM32G4 Series

ST STM32G4 Series User Manual

ST STM32G4 Series
2126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2116 background imageLoading...
Page #2116 background image
Revision history RM0440
2116/2126 RM0440 Rev 4
49 Revision history
Table 447. Document revision history
Date Revision Changes
06-May-2019 1 Initial release.
10-Oct-2019 2
Document convention section
Updated Table 2: Product specific features.
System architecture section
Updated Section 2.1: System architecture replacing FMC by FSMC.
Updated Figure 2: Memory map replacing FMC by FSMC.
Memory organization section
Updated Table 3: STM32G4 Series memory map and peripheral register boundary
addresses
Updated Table 2.4: Embedded SRAM SRAM2 (mapped at address 0x2000 4000).
Updated Table 7: Flash module - 512/256/128 KB dual bank organization (64 bits
read width).
Updated Table 8: Flash module - 512/256/128 KB single bank organization (128 bits
read width).
Power control section
Updated Section 6.1: Power supplies.
Reset and clock control section
Updated Figure 17: Clock tree.
Updated FMC into FSMC in:
Section 7.4.10: AHB3 peripheral reset register (RCC_AHB3RSTR).
Section 7.4.16: AHB3 peripheral clock enable register(RCC_AHB3ENR).
Section 7.4.22: AHB3 peripheral clocks enable in Sleep and Stop modes register
(RCC_AHB3SMENR).
System controller configuration section
Updated Section 10.2.1: SYSCFG memory remap register (SYSCFG_MEMRMP)
bits[2:0] description.
Peripherals interconnect matrix section
Updated Table 82: Interconnect 11 on-chip source FLTxSRC[1:0] = 01 column.
Nested vectored interrupt controller section
Updated Table 97: STM32G4 Series vector table.
Flexible static memory controller (FSMC) section
Updated Section 19: Flexible static memory controller (FSMC).
CORDIC co-processor (CORDIC) section
Updated Section 17: CORDIC co-processor (CORDIC).
Analog digital converter (ADC) section
Updated Section 21.4.33: Monitoring the internal voltage reference.
Updated Section : Sampling time control trigger mode.
Digital analog converter (DAC) section
Updated Section 22: Digital-to-analog converter (DAC).
Comparator section
Updated Section 24.6.2: COMP register map.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ST STM32G4 Series and is the answer not in the manual?

ST STM32G4 Series Specifications

General IconGeneral
BrandST
ModelSTM32G4 Series
CategoryMicrocontrollers
LanguageEnglish

Related product manuals