Software Manual
24
■ When the IP address cannot be obtained from the DHCP server :
When the DHCP server is not available, "Did not obtain" is displayed in the ‘IP address’ field for a
printer that is not assigned to any IP address. To use such a printer, follow the steps below to specify the
IP address.
1) Select a printer that is not assigned to any IP address, and then click [Configuration].
2) Enter a temporary IP address to assign, and then click [OK].
3) Connect to the printer using the temporarily assigned IP address. The Web Configuration screen is
displayed. see step (7) and the subsequent steps to complete the setting of a fixed IP address.
To Next Page
Loading...
