STEMCELL TECHNOLOGIES INC.’S QUALITY MANAGEMENT SYSTEM IS CERTIFIED TO ISO 13485 MEDICAL DEVICE STANDARDS.
FOR RESEARCH USE ONLY. NOT INTENDED FOR HUMAN OR ANIMAL DIAGNOSTIC OR THERAPEUTIC USES.
TOLL-FREE PHONE 1 800 667 0322
PHONE +1 604 877 0713 VERSION 02
INFO@STEMCELL.COM
TECHSUPPORT@STEMCELL.COM
FOR GLOBAL CONTACT DETAILS VISIT WWW.STEMCELL.COM DOCUMENT #10000005578
26
5.0 Report Files
Two types of report files are automatically saved during RoboSep™-S operation: RoboSep™-S End-of-Run
Reports (section 5.1) and log files (section 8.1). RoboSep™-S End-of-Run Reports contain details of each run
as entered by the operator, while log files contain more detailed information about instrument operation.
5.1 RoboSep™-S End-of-Run Report Files
RoboSep™-S End-of-Run Reports contain information such as the operator ID (User Profile), protocol name,
run time, reagent information, sample ID, and volumes used.
EasySep™ reagent lot numbers as well as sample ID information can be entered before each run at the time
of loading the carousel (section 4.3.3).
To access RoboSep™-S End-of-Run Reports:
1. Select
[Reports] from the Home screen.
2. Select the desired report you want to view. A
[Select] will appear to the left of the selected report.
3. Select View Report to view a PDF version of the report.
Note: Multiple reports can be selected and saved onto a USB drive by simply selecting “Save Reports to
USB”.
To Next Page
Loading...