6.
Pre-wash
On the left is the
duration
of the pre-wash
stage in minutes (0to20).
On the right is the
number of times
the
pre-wash stage is performed (0to3).
If either value is zero, pre-wash is not
performed.
7.
Degassing
In the center is the
duration
of the
degassing stage in minutes (0to10).
If the value is set to zero, degassing is not
performed.
8.
Washing
On the left is the quantity of
chemical
dispensed (0to2000ml, or
0to67.6fl.oz).
In the center is the
water temperature
(0°Cto+60°C, or +32°Fto+140°F).
On the right is the
duration
in minutes
(0to40).
9.
Rewash
In the center is the
number of times
the
tank fluids will be used for washing
(0to10).
If value is set to zero, rewash is not
performed and tank fluids are drained
after every washing stage.
THE SUPERVISOR MENU 81
InnoWave Unity & Unity 20 Operator Manual
To Next Page
Loading...
Need help?
General
