11-6 Pretrip inspection and maintenance
3 Lowering the cab
1. Release the lock lever hold-down and secure
it under the clip .
CAUTION
Hold the cab tilt grip when lowering the cab.
Holding lever B or any other part when lowering
the cab could result in damage to the tilt mecha-
nism.
2. Hold the tilt grip to support the cab. Lift the lock
lever and release the cab stay .
3. Still holding the tilt grip , lower the cab until the
hook on the safety release (lever C) engages
with the cab mount .
WARNING
• Before lowering the cab, make sure that
you have not left flammable objects inside
the engine compartment. This could cause
a fire and result in burn injuries.
• The cab could drop suddenly, causing a
personal injury, if there are heavy objects
inside, or on the roof deck. Always lower
the cab slowly and provide adequate sup-
port.
• When you have unlocked the cab stay,
remove your hands from the lock lever. As
the cab stay releases, it tips toward the
rear of the vehicle. A hand, or other body
part could get pinched, and cause an
injury.
Z13283
Z10676
Z10677
To Next Page
Loading...