12-9
3 Fuse replacement
1. To remove the fuse that is to be replaced, grip it
using the fuse puller in the fuse box. The
amperage and circuit designation for each fuse
are shown on the inside of the main fuse box
cover and on the inside of the high-amp fuse
box cover.
2. Select a spare fuse of the correct amperage.
CAUTION
• If the cause of a blown fuse cannot be deter-
mined, or the same fuse blows frequently,
bring the vehicle to an authorized Sterling
service facility.
• Use care not to splash water on or around
the fuse box cover. Should water be
splashed over the fuse box cover, check the
inside of the fuse box for water.
WARNING
Be sure to use fuses of the correct amperage.
A fuse of incorrect amperage could cause a
fire, resulting in burn injuries and loss of life.
Z11260
GOOD BAD
Z11217a
To Next Page
Loading...