12-12 In an emergency
4 high-amp fuses
There are high-amp fuses between the battery and
fuse box, and between the battery and alternator.
These protect circuits in the same way that ordinary
fuses do. If a high-amp fuse is blown, most of the
vehicle’s electrical circuits become inoperative.
4.1 Inspection
1. Pull down the clamps and lift the cover
straight upward to remove it. To install the cover,
place it on the box and press it straight down-
ward. Align the holes of the latches with the
catches on the box. While still pressing the
cover downward, retain it with the clamps.
The amperage and protected circuit of each
high-amp fuse are shown on the inside of the
high-amp fuse box cover.
2. Check for a blown high-amp fuse. Look into the
inside of the fuse through the view window .
If a high-amp fuse blows, call an authorized
Sterling service facility immediately.
Z15038a
Z11258
To Next Page
Loading...