Stiga MP 84/98 - Page 5

WORKSHOP MANUAL
MP 84/98 - MP 84/98 Hy
INDEX OF FUNCTIONAL UNITS
Transmission - Brake - Wheels
General informations
The use of outsourced thirdparty mechanic or
hydrostatic drive units is foreseen on this ma
chine.
This manual only describes the operations relat
ing to the application of the machine units; refer
ence to the drive unit’s Manufacturer’s Manual is
recommended for information regarding servic
ing, disassembly and replacement of compo
nents.
Related topics
[
1.1] Identication of components
RELATED TOPICS:
Adjustments and tuning
Brake adjustment ............................................................................. [
4.2]
Drive belt adjustment ........................................................................ [
4.3]
Drive pedal adjustment (
MP 84/98 Hy) ....................................... [ 4.4]
Removal of external parts and main assemblies
Removal of the rear axle (
Peerless MST 205535 E) .................. [ 5.6]
Removal of the rear axle (
HydroGear T2ADBF2X3C1RX1) .... [ 5.6a]
Repairs
Replacement of tyres and wheels .................................................... [
6.1]
Replacement of front wheel bearings .............................................. [
6.2]
Replacement of the drive belt .......................................................... [
6.4]
Replacement of the small wheels for the drive belt .......................... [
6.5]
Replacement of the brake pads and disc (
MP 84/98) .............. [ 6.10]
CHAPTER REVISION FROM ... PAGE
ii 0 2018 2 of 6