Stihl FS 461 C-M - Using the Trimmer; Brushcutter (above ground); Working Conditions

0458-838-8601-A
16
English 5 IMPORTANT SAFETY INSTRUCTIONS
– Position the power tool so that all parts of your body
are clear of the cutting attachment whenever the
engine is running.
– The operator must use a harness as instructed in
this manual, @ 23
￭ When the unit is mounted with a metal cutting attachment,
the operator must take special precautions to reduce the
risk of severe injury from loss of control and contact with
the cutting blade:
– The operator must mount the proper deflector as
instructed in this manual, @ 8.2.
– The operator must use a harness, @ 9.1.
￭ Working with the cutting attachment above ground level or
perpendicular to the ground increases the risk of severe
injury from thrown objects. It also exposes more of the
cutting attachment and makes the unit more difficult to
control, increasing the risk of injury. To reduce the risk of
serious or fatal injury from loss of control or thrown
objects:
– Keep the cutting attachment at ground level, parallel
to the ground.
￭ To reduce the risk of serious or fatal injuries to the
operator or bystanders from contact with the cutting
attachment:
– Do not touch the cutting attachment while the engine
is running.
￭ To reduce the risk of serious or fatal cut injuries to the
operator or bystanders from loss of control, keep proper
footing and balance at all times:
– Make sure you have good balance and a secure
footing at all times.
– Never work on a ladder or while standing on any
other insecure support.
– Take special care in overgrown or wet terrain and
always watch for hidden obstacles such as tree
stumps, roots, rocks, holes and ditches to avoid
stumbling or falling.
– Be extremely cautious when working on slopes or
uneven ground.
– For better footing, always clear away fallen
branches, scrub, cuttings and other material, objects
or vegetation that can increase the danger of
slipping, tripping or falling.
– Never operate above waist height.
– Do not overreach.
￭ The trimmer / brushcutter should be balanced for proper
control and less fatigue during operation.
– Adjust the position of the handlebar and harness to
achieve and maintain a comfortable and effective
working position, @ 9.
5.7.4 Working Conditions
WARNING
￭ Operate your trimmer / brushcutter only under good
visibility during favorable daylight conditions.
– Postpone the work if the weather is windy, foggy,
rainy or inclement.
￭ Your trimmer / brushcutter is a one-person machine.
– Bystanders, especially children, and animals should
not be allowed in the area where it is in use.
– Switch it off immediately if you are approached.
￭ To reduce the risk of injury to bystanders and
unauthorized users:
– Never leave the trimmer / brushcutter unattended
when the engine is running.
– Shut off the engine during work breaks and any other
time the power tool is not in use.
– Keep hands, feet and other body parts
away from the cutting attachment.
– Never touch a moving cutting attachment
with your hand or any other part of your
body.