0458-838-8601-A
6
English
4 Safety Symbols on the Products
6 Mowing Head
Mowing head for mounting nylon trimmer line.
7 Limit Stop
Designed for use with circular saw blades to position the
power tool steady against the wood and reduce the risk
of injury from blade thrust or kickout.
8 Circular Saw Blade
Metal blade for cutting wood.
9 Transport Guard
Designed to reduce the risk of injury from contact with a
metal cutting attachment while transporting the unit.
This power tool is sold with a cutting attachment and
appropriate deflector. Other cutting attachments and
appropriate deflectors are available as accessories.
4.1 Trimmer / Brushcutter
The following safety symbols are found on the trimmer /
brushcutter:
4.2 Deflector for Mowing Heads
The following symbols may be found on deflectors designed
for use with mowing heads:
4 Safety Symbols on the Products
To reduce the risk of injury, follow the specified
safety precautions.
Read and follow all safety precautions in the
instruction manual. Improper use can lead to
serious or fatal personal injury or property
damage.
To reduce the risk of eye injury and hearing loss,
always wear proper eye protection and hearing
protection. Wear an approved protective helmet
when there is a risk of head injury, @ 5.4.
Wear sturdy boots with non-slip soles. When
working with a metal cutting attachment, wear
steel-toed safety boots, @ 5.4.
Always wear non-slip, heavy-duty work gloves
(e.g. made of leather or other wear resistant
material) when handling the machine or metal
cutting attachments, @ 5.4.
Kickout (blade thrust) may cause loss of control
of the power tool resulting in serious or fatal
injury to the operator or bystanders. To reduce
the risk of injury, use extreme caution when
using a rigid blade, @ 5.8.1.
To reduce the risk of personal injury from thrown
objects, inspect the work area and remove
stones, glass, rocks, pieces of metal and other
objects that could be thrown by the cutting
attachment. @ 5.7.5.
To reduce the risk of personal injury
from thrown objects, keep bystanders
at least 50 ft. (15 m) away, @ 5.7.5.
The gearbox becomes hot during operation. To
reduce the risk of burn injury, avoid contacting
the gearbox while it is still hot following
operation, @ 6.
The deflector may be used in combination with
mowing heads.
The deflector must not be used in combination
with grass cutting blades.
15m (50ft)
To Next Page
Loading...
