Stihl FS 94 R User Manual

FS 94 R
English
13
Using the Barrier Bar
A barrier bar may have to be mounted at
the loop handle to suit the tool you
intend to use – see "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
The barrier bar is included with the
machine or is available as a special
accessory.
Mounting the Loop Handle with Barrier
Bar
N Insert the square nuts (1) in the
barrier bar (2) – the holes must line
up
N Insert the clamp (3) in the loop
handle (4) and position them
together on the shaft (5)
N Position the clamp (6) against the
shaft
N Position the barrier bar (2) – note
position!
N Line up the holes
N Insert the screws (7) in the holes
and screw them into the barrier bar
as far as they will go
N Go to "Securing the Loop Handle"
Mounting the Loop Handle
002BA571 KN
2
002BA098 KN
1
1
5
4
002BA099 KN
2
3
6
7

Stihl FS 94 R Specifications

General

Engine Displacement	24.1 cc
Engine Power	0.9 kW (1.2 bhp)
Cutting Diameter	420 mm (16.5 in)
Weight	4.9 kg
Fuel Capacity	540 cc (18.3 oz)
Vibration Level	3.5 m/s²