Stihl FS 94 R User Manual

FS 94 R
English
32
All accessible screws, nuts and bolts (not
adjusting screws)
Tighten X
Anti-vibration elements
Visual inspection
4)
XXX
by a dealer
2)
X
Cutting attachment
Visual inspection XX
replace X
Check for secure fit XX
Metal cutting attachment sharpen XX
Gearbox lubrication
check X
top up X
Safety information label replace X
1)
Only if there is a noticeable loss of engine power
2)
STIHL recommends STIHL dealers
3)
see chapter "Inspections and Maintenance by Dealer", section "Spacer"
4)
see chapter "Inspection and Maintenance by Dealer", section "Antivibration Elements"
The following intervals apply for normal operating conditions. The specified intervals
must be shortened accordingly when working for longer than normal or under difficult
cutting conditions (extensive dust, etc.).
Before starting work At the end of work and/or daily Whenever tank is refilled Weekly Monthly Annually If faulty If damaged As required

Stihl FS 94 R Specifications

General

Engine Displacement	24.1 cc
Engine Power	0.9 kW (1.2 bhp)
Cutting Diameter	420 mm (16.5 in)
Weight	4.9 kg
Fuel Capacity	540 cc (18.3 oz)
Vibration Level	3.5 m/s²