MS 500i 21
14.1 Tools, Servicing Aids
– Socket, T27x125 – 0812 542 2104 or equivalent
– Torque wrench – 5910 890 0302 or equivalent
– Screwdriver, T27x200 – 5910 890 2415 or equivalent
– Hook – 5910 893 8800
– Flat nose side cutting pliers
– Pin punch, 6 mm
– STIHL OH 723 press fluid – 0781 957 9000
– Loctite 242 (medium-strength threadlocking
adhesive) – 0786 111 2101
– Chain oil
14.2 Removing Oil Tank Vent Valve
N Preparations, @ 3.1.
N Remove the side plate, @ 12.2.
N Open the tank cap.
N Drain the oil tank into a suitable container.
N Use a 6 mm punch to drive out the valve (7) from
inside the tank.
14 Chain lubrication
4
3
1
6
7
5
2 M4x12
(3.5 Nm / 31 lbf. in.)
M4x12 (3.5 Nm / 31 lbf. in.)
2
0000-GXX-5590-A0
To Next Page
Loading...
