Stihl MS 500i - The Chain Brake

MS 500i46
N Insert and tighten down screw on AV element
between tank housing and crankcase, @ 17.3.
N Install the handlebar, @ 9.3.
N Install the injection pump, @ 21.9.
N Install trigger lockout, throttle trigger and throttle
linkage, @ 16.3.
N Push generator’s wiring harness into the guides in the
tank housing, @ 22.5.
N Install the controller, @ 19.8.
N Install sleeve and throttle body, @ 15.5.
N Install the filter base, @ 15.3.
N Fit the ignition lead and spark plug boot, @ 19.6.
N Mount the shroud.
N Install the air filter.
N Fit the filter cover.