MS 500i 63
N Install the generator, @ 22.5.
N Install the AV elements, @ 17.3.
N Install the handlebar, @ 9.3.
N Install throttle body and sleeve, @ 15.5.
N Install the filter base, @ 15.3.
N Install the rewind starter, @ 10.11.
N Install the flywheel, @ 18.3.
N Install the oil pump, @ 14.10.
N Install the worm gear, @ 14.11.
N Install the clutch, @ 11.6.
N Install the chain brake, @ 13.3.
N Install the chain tensioner, @ 12.3.
N Install the spiked bumper, @ 5.5.
N Install the chain catcher. @ 5.3.
N Fit the chain sprocket cover.
N Install the spark plug.
N Fit the spark plug boot.
N Mount the shroud.
N Install the air filter.
N Fit the filter cover.
N Calibrate the saw, @ 4.
The controller is optimally adjusted to suit the mechanical
and mechatronic components.
To Next Page
Loading...
