– Put the tiller in the driving position. Look be-
hind to check that the way is clear. Turn the
throttle in the direction of travel towards the
operator and drive very slowly and carefully
in a straight line away from the shelves.
Brake gradually.
– Check that there is sufficient space be-
tween the forks and the shelving.
– Lower the load to the transport position, ap-
proximately 300 mm from the ground, and
read the "Transporting loads" section.
Use
4
Moving the load
88 45728043478 EN - 11/2021 - 09
To Next Page
Loading...
