Stober SC6 Series Operating Manual

STOBER 1 | Foreword
02/2020 | ID 443025.06
5
1 Foreword
STOBER drive controllers of the SC6 and SI6 series are available with the Ethernet-based EtherCAT fieldbus system as
standard.
The STOBER product portfolio is also designed for combining these drive controllers with the MC6 motion controller as an
EtherCAT master. Together with the associated AS6 development environment, STOBER gives you a complete and uniform
solution with regard to EtherCAT communication.
Drive controllers of the SC6 and SI6 series successfully passed the EtherCAT as well as Fail Safe over EtherCAT (FSoE)
Conformance Test. There, the communication interface was tested to ensure the reliability and function of the lower-level
communication regardless of vendor.

Stober SC6 Series Specifications

General

Brand	Stober
Model	SC6 Series
Category	Controller
Language	English