STONEX R2W PLUS 500 - Page 38

R2W PLUS
29
⑤Click “L.Angle” key.
【L.Angle】
⑥Collimate the first target
A again using horizontal
clamp and tangent part.
⑦Click “Unlock” key.
Collimate A
again
【Unlock】
⑧Collimate the second
target B again using
horizontal clamp and
tangent part.
⑨Click “L.Angle” key.
And then the screen
displays the sum and the
average of all angles.
※1
Collimate B
again
【L.Angle】
⑩Repeat steps ⑥ ～ ⑨
according to the
requirement, and carry out
angle retesting. ※2
※ 1 Click “Exit” key to finish angle retesting
※ 2 Ht: the sum of multiple observed values
Hm: the average of multiple observed values