Stryker altrix - Storage; Transporting

FFiigguurree 2233 –– MMaannaaggeemmeenntt ssttrraappss
SSttoorriinngg tthhee ccoonnttrroolllleerr
Storage is equal to or greater than 7 days without use.
CCAAUUTTIIOONN
• Do not store the product with water in the device.
• Always store the product within the specified environmental condition values.
To store the controller:
1. See
Disinfect the internal water circuit and hoses every 14 days (page 39).
2. See
Draining the thermal transfer devices (page 31).
3. See
Cleaning the external surfaces (page 36).
4. See
Disinfecting external surfaces (page 37).
NNoottee
• Always bring the controller to room temperature after high or low temperature storage.
• Always store the controller with the reservoir in place.
TTrraannssppoorrttiinngg tthhee pprroodduucctt
Make sure to follow these procedures for transporting the product to avoid the risk of possible injury or equipment damage.
CCAAUUTTIIOONN
• Always use extra care when you transport the product long distances and on inclines greater than five degrees. Ask for
help, if necessary, to avoid the risk of tipping.
• Always use the handle to move the product. Do not attempt to move the product by pulling on cables, hoses, or by any
other means.
• Avoid ramps that are steeper than ten degrees to avoid tipping the product.
• Do not hang items on the controller handle to avoid the risk of tipping the product.
• Always store the power cord, cables, and hoses before you transport the product to reduce the risk of trip hazard.
1. Make sure that the pathway is clear.
2. Unplug the product from the hospital-grade or medical-grade wall outlet. See
Storing the power cord and hoses (page
33).
EN 34 8001-109-001 Rev C.0