Stryker Crossfire 2 - RF Ablation Controls; Default handpiece controls

EN-25
DRAFT
RF Ablation Controls
Warning During use, the RF, Crosseal, and shaver handpieces
generate electronic noise that may interfere with EKG
readings. Before responding to any erratic EKG readings,
rst power down the system to ensure the readings are not
the result of system noise.
RF and Crosseal handpieces are intended for single use only and should not
be reprocessed or reused.
Default handpiece controls
1
2
3
1. Adjust CUT power level (single press)
or
Activate/deactivate Force Modulation
(press and hold for three seconds)
2. Activate CUT
3. Activate COAG