EN-46
DRAFT
Note: If a disturbance occurs on the video monitor, the user should ensure
that the probe cable is not near any other instrument cables.
Error Codes
When the Crossre 2 system encounters an error, it will display an error
code on the LCD. Error codes are grouped into general categories that share
common solutions:
1
2
1.
Error Code
2.
Category
Solution
A## Activation Errors Reactivate
E## System-level Errors Reboot system
P## Probe Errors Follow instructions on LCD, or
replace disposable attachment
W## Warning Errors No action required;
informational only
To Next Page
Loading...
Need help?
General
