EN-17
DRAFT
Adjusting User and System Settings
User Preference Settings
User preferences, such as power and cutting speeds and button assignments
for the handpiece and footswitch, can be adjusted through the Crossre2
interface.
Select from the default settings provided with the console, or contact your
Stryker representative to customize your own.
1. Press
.
DEFAULT
SMITH SHLDR
SMITH KNEE
2. Press
to select a
default setting.
3. Press
to conrm
selection and exit.
Or, press
to cancel
selection.
Note: User preference settings will not take eect unless a disposable
attachment is connected to the shaver.
To Next Page
Loading...
Need help?
General
