Stryker Crossfire 2 User Manual

EN-49
DRAFT
Technical Specications
Stryker Endoscopy reserves the right to make improvements to the product(s)
described herein. Product(s), therefore, may not agree in detail to the
published design or specications. All specications are subject to change
without notice. Please contact the local Stryker Endoscopy distributor or call
your local Stryker Endoscopy sales representative or agent for information on
changes and new products.
Dimensions
Size: 16.9" L × 12.5" H × 4.5" W
Weight: 20 lbs
Environmental Specications
Operating temperature: 5 – 40°C
Operating humidity: 30 – 95% RH
Shipping temperature: -18 – 60°C
Shipping humidity: 15 – 90% RH
System Input Power Requirements
Voltage: 100-240 VAC @ 50/60Hz, 6 – 10 A
Inlet Fuse: 15 A, 250V
Electrical Specications
Motor output max speed: 12000 RPM
Motor duty cycle: Continuous operation
RF output waveform: 200 kHz ± 1%, square wave,
Crest factor <1.5 @ 200 ohms

Stryker Crossfire 2 Specifications

General

Brand	Stryker
Model	Crossfire 2
Category	Medical Equipment
Language	English