EN-36
DRAFT
Warning Should emergency shutdown become necessary, power
o the console as described above. As an added safety
measure, the console can be separated from the AC power
mains by detaching the AC power cord from either end.
Adjusting User and System Settings
User Preference Settings
User preferences, such as button assignments for the handpiece and
footswitch, can be adjusted through the Crossre2 interface.
Select from the default settings provided with the console, or contact your
Stryker representative to customize your own.
1. Press
.
DEFAULT
SMITH SHLDR
SMITH KNEE
2. Press
to select a
default setting.
3. Press
to conrm
selection and exit.
Or, press
to cancel
selection.