Stryker Crossfire 2 User Manual

EN-45
DRAFT
Hand-
piece
The temperature
is higher than
normal
• Allow the unit to cool before
restarting.
The unit has
reached its
recommended
service interval
• Contact your Stryker
representative.
Disposable
Attachments
RF probe is not
ready
• Check the connection to the
console.
RF probe is
expired
• Replace probe.
RF probe
identication is
invalid
• Replace probe.
RF probe
communication
error
• Check the connection to the
console.
• If necessary, replace probe.
Exceeded time
usage
• Replace probe
RF power is too
high
• Check the probe for damage.
• If necessary, replace probe.
RF voltage is too
high
• Check the probe for damage.
• If necessary, replace probe.
RF current is too
high
• Check the probe for damage.
• If necessary, replace probe.
RF delivery
has exceeded
continuous limit
• Clear error and continue
Low impedance
detected
• Check the probe for damage.
• If necessary, replace probe.
Footswitch A wireless
footswitch is not
detected
• Disconnect the wired footswitch.
The footswitch
icon does not
appear
• Ensure the unit is connected.
• Ensure that there is no damage to
the cable or connector.

Stryker Crossfire 2 Specifications

General

Brand	Stryker
Model	Crossfire 2
Category	Medical Equipment
Language	English