EN-31
DRAFT
Reading the LCD
In dual mode, the LCD will show the status of both devices. Whichever device
is controlled by the footswitch will appear on the right side of the LCD.
F
9000
FIXED
11
SERFAS MC DISP NAME
Dual mode, shaver
handpiece controlled by
footswitch.
F
9000
FIXED
11
SERFASMC DISP NAME
Dual mode, RF probe
controlled by footswitch.
Adjusting handpiece settings with the console
In dual mode, settings can be adjusted for whichever handpiece appears on
the right side of the LCD.
1. Press
to move the desired handpiece to the right side of the LCD.
2. Use the
buttons on the console to manually adjust the power or
speed setting for the selected handpiece.
To Next Page
Loading...
Need help?
General
