Stryker Isolibrium 2971 Maintenance Manual

Electrical requirements ANSI/AAMI ES60601-1:2005/(R)2012
and A1:2012, C1:2009/(R)2012 and
A2:2010/(R)2012
CAN/CSA-C22.2 No. 60601-1 (2008)
120VAC 50/60Hz, 2.5A
Power cord 3 foot, 16 AWG cord with hospital grade plug for use with the IInnTToouucchh foot end
auxiliary power outlet
Low Air Loss flow rate 100 LPM
Leakage current 300 uA Maximum
Noise level 50 dBA maximum
SSttrryykkeerr reserves the right to change specifications without notice.
EEnnvviirroonnmmeennttaall ccoonnddiittiioonnss
OOppeerraattiioonn SSttoorraaggee aanndd ttrraannssppoorrttaattiioonn
Ambient temperature
86 °F
(30 °C)
50 °F
(10 °C)
140 °F
(60 °C)
-40 °F
(-40 °C)
Relative humidity (non-condensing)
75%
30%
95%
10%
Atmospheric pressure
1060 hPa
700 hPa
1060 hPa
500 hPa
See the IInnTToouucchh manual for bed specifications.
CCoonnttaacctt iinnffoorrmmaattiioonn
Contact Stryker Customer Service or Technical Support at: 1-800-327-0770.
Stryker Medical
3800 E. Centre Avenue
Portage, MI 49002
USA
To view your operations or maintenance manual online, see https://techweb.stryker.com/.
Have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support.
Include the serial number in all written communication.
SSeerriiaall nnuummbbeerr llooccaattiioonn
The serial number (A) for your support surface is located on the patient right side of the foot box on the specification label.
Unzip the support surface top cover (see
Cover replacement, top (page 25)).
2971-009-002 Rev D.0 5 EN

Stryker Isolibrium 2971 Specifications

General

Brand	Stryker
Model	Isolibrium 2971
Category	Medical Equipment
Language	English