37
Guidance and Manufacturer’s Declaration: Electromagnetic Emissions
L10 AIM Light Source is intended for use in the electromagnetic environment specied below. The
customer or the user of L10 AIM Light Source should ensure that it is used in such an environment.
Emissions test Compliance Electromagnetic Environment -
guidance
RF emissions
CISPR 11
Group 1 Class B The L10 AIM Light Source is suitable
for use in all establishments other
than domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes, provided the following warning
is heeded:
Warning: This system is intended
for use by health care professionals
only. This system may cause radio
interference or may disrupt the operation
of nearby equipment. It may be
necessary to take mitigation measures,
such as reorienting or relocating the
system or shielding the location.
Harmonic emissions
IEC61000-3-2
Class A
Voltage uctuations/ Flicker
emissions
IEC61000-3-3
Complies
To Next Page
Loading...
