PPrreevveennttiivvee mmaaiinntteennaannccee
CCAAUUTTIIOONN -- Always use authorized parts to avoid the risk of product damage.
Establish and follow a maintenance schedule and keep records of the maintenance activity. Remove product from service
before you perform the preventive maintenance inspection. You may need to perform preventive maintenance checks more
often based on your level of product usage. Service only by qualified personnel.
When using maintenance products, follow the directions of the manufacturer and reference all material safety data sheets
(MSDS).
RReegguullaarr iinnssppeeccttiioonn aanndd aaddjjuussttmmeennttss
The following schedule is a general guide to maintenance. Factors such as weather, terrain, geographical location, and
individual usage will alter the required maintenance schedule. If you are unsure how to perform these checks, contact your
Stryker service technician. If you are in doubt as to what intervals to follow to maintain your product, consult your Stryker
service technician. Check each routine and replace worn parts if necessary.
EEvveerryy mmoonntthh oorr ttwwoo hhoouurrss
Inspect these items every month or two hours, whichever comes first.
IItteemm IInnssppeecctt
Manual backup release handle Manual backup release handle functions
Litter Frame and litter
Base Frame and base
Wheels All wheels are secure, roll, and swivel
Head section Safety bar operates. Pull toward the head section to make
sure that the safety bar swings and rotates freely and pulls
back to the home position
Restraint Restraints function with no excessive wear (such as a bent
or broken receiver or latch plate or torn or frayed webbing)
EEvveerryy tthhrreeee mmoonntthhss oorr ssiixx hhoouurrss
Inspect these items every three months or six hours, whichever comes first.
IItteemm IInnssppeecctt
Manual backup release handle Base extends and retracts when you pull the manual
backup release handle
Cot does not lower when you pull the manual backup
release handle with 100 lb (45 kg) or more on the cot
Litter All fasteners are secure
Backrest cylinder operates
Adjust pneumatic cylinder for full range of motion, if
required
Dead stop (6085-001-094) for wear
Base All fasteners are secure
EN 6 6086-009-002 Rev AB.2
To Next Page
Loading...
Need help?
General
