Strymon EC-1 - Using Multiswitch Plus in Custom Mode; Saving an EC-1 Favorite Preset with Multiswitch Plus

pg 27
Using MultiSwitch Plus in Custom Mode
When using EC-1 with MultiSwitch Plus in Custom Mode, the three
footswitches provide access to Tap Tempo, Favorite Preset selection, and
Infinite Repeats�
• Tap on footswitch A to set the TAP TEMPO rate for your EC-1
repeats to follow�
• Press and release footswitch B to load your designated FAVORITE
preset (see below)�
• Press and hold footswitch C for INFINITE delay repeats while the
footswitch is held�
Saving an EC-1 Favorite Preset with MultiSwitch Plus:
1 Dial in the sound that you would like to save as your Favorite on EC-1�
2 Press and hold the EC-1 footswitch for 3 seconds until its LED blinks
GREEN, then release the footswitch�
3 Press and release the B MultiSwitch Plus footswitch to save the
current state of the pedal as your Favorite preset to this location�