Strymon EC-1 - External Control; Syncing to MIDI Clock for Delay Time

pg 17
External Control
Syncing to MIDI Clock for Delay Time
Once configured for MIDI Mode, EC-1 will automatically respond to MIDI
Clock when received via the EXP/MIDI jack, allowing EC-1’s delay time to
be synced to the incoming MIDI Clock BPM�
NOTE: The MIDI Clock tap divisions follow the settings configured for the
Onboard Tap Mode: EIGHTH TRIPLET, EIGHTH, DOTTED EIGHTH, and
QUARTER note—see “Onboard Tap Mode” on page 5�
NOTE: Incoming MIDI Clock will also be sent to EC-1’s MIDI Out when the
MIDI Out is set to THRU� See page 32�