pg 28
MIDI Functionality
Configuring EC-1 to Use MIDI
Using MIDI unlocks a set of tools that can be used to load any of EC-1’s
300 preset locations using a suitable MIDI controller or interface
connected to the EC-1 EXP/MIDI jack� This requires a Strymon MIDI EXP
cable or a MIDI controller/interface, such as Strymon Conduit, with at
least one quarter-inch output�
NOTE: When using a Strymon MIDI EXP Cable, the MIDI OUT Mode must be
set to Off� (See page 32 for details�)
OR
To Next Page
Loading...
