Strymon EC-1 - Page 8

pg 8
Rear Panel I/O and Control (continued)
9VDC
Only use an adapter with the
following rating:
• 2�1mm, center-negative
• 9VDC
• 250mA minimum
(Adapter sold separately�)
USBC
®
Computer connection for MIDI
I/O and firmware updates�
EXP/MIDI
Multifunction communication jack for external control of EC-1’s features
and functions� Can be set to operate in one of the following modes� (See
“Configuring the EXP/MIDI Jack” on page 15 for details�)
Expression Pedal Mode (see page 18)�
Favorite Mode (see page 19)�
Tap Mode (see page 21)�
Infinite Mode (see page 21)�
MIDI Mode (see “Configuring EC-1 for MultiSwitch Plus” on page 24
or “Saving Presets in MIDI Mode” on page 33)�