TimeLine - User Manual
®
pg 12
MIX 2: Adjusts the mix level of Delay 2. Set to TRACK to follow
Delay 1 Mix, set by the Mix knob. When not set to
TRACK, you can set an independent mix level for delay
2. In this case changing the Mix knob will only affect
the mix level for Delay 1.
TIME 2:
Adjusts the delay time of Delay 2 relative to Delay
1. Since Delay 2 is a ratio of Delay 1, it adjusts with
changes in delay TIME or Tap Tempo to keep the same
ratio, and allows for cool rhythmic effects.
REPEATS 2: Adjusts the repeats level of Delay 2. Set to TRACK to
follow Delay 1 Repeats knob. When not set to TRACK,
you can set an independent repeat level for delay 2.
In this case changing the Repeats knob will only affect
the repeats level for Delay 1.
1/8
1/7
1/6
1/5
1/4
1/3
2/5
1/2
2/3
3/4
4/5
5/6
7/8
1/1
5/4
4/3
3/2
5/3
2/1
5/2
3/1
7/2 8/1
4/1
5/1
6/1
7/1
Two independent delay lines that can be run in series or parallel. The
second delay tracks the first at selectable time ratios. This is very
useful for creating interesting rhythmic delays that feed into each
other or act independently in parallel.
TRACK
|||||||||||
TRACK
|||||||||||
Delay Machines: Dual
PARAMETERS:
Continued on Next Page
To Next Page
Loading...
