20. Warranty
Stuart warrants this instrument to be free from defects in material and workmanship, when used
under normal laboratory conditions, for a period of 3 years. In the event of a justified claim Bibby
Scientific Ltd will replace any defective component or replace the unit free of charge. This warranty
does NOT apply if damage is caused by fire, accident, misuse, neglect, incorrect adjustment or repair,
damage caused by incorrect installation, adaptation, modification, fitting of non-approved parts or
repair by unauthorised personnel.
Bibby Scientific Ltd., Stone, Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121 Fax: +44 (0) 1785 813748
E-mail: service@bibby-scientific.com
Website: www.bibby-scientific.com
21. Specification
Overall Dimensions:
Height: 164mm
Depth: 360mm
Width: 300mm
Weight: 4.6kg
Technical Specifications:
Temperature range Ambient to 400°C
Temperature resolution 0.1°C
Ramp rate 0.1°C to 20.0°C/minute
Cooling down time 350°C to 50°C ~ 12 minutes
Heating up time 50°C to 350°C ~ 6 minutes
Number of samples Up to three simultaneously
Display 7" HD Colour touch screen
Sensor PT1000 Platinum resistance
Memory storage 8GB (approximately 300 results with video)
Electrical supply 100V-230V, 50-60Hz
Power 150W
22. Accessories
The following accessories are available from your local distributor.
Description Catalogue Number
Capillaries, open at one end (pack of 100) SMP10/1
Capillaries, closed at both ends (pack of 100) SMP2/1
Printer SMP50/PRINTER
58
To Next Page
Loading...